SPEED Kriss Vector AEG Gen2 Magazine Release
The SPEED Airsoft Kriss Vector AEG Gen2 Magazine Release allows true ambidextrous operation with rapid instinctive magazine changes.
No more unnatural finger stretching to release the magazine.
The SPEED Magazine Release also retains the stock release position for greater flexibility.
Installation takes just minutes with only two mounting screws supplied in the kit.
SA3910 SPEED Ambidextrous Kriss Vector AEG Gen2 Magazine Release (Black/Silver)
SA3911 SPEED Ambidextrous Kriss Vector AEG Gen2 Magazine Release (Black/Black)
SA3912 SPEED Ambidextrous Kriss Vector AEG Gen2 Magazine Release (Grey/Silver)
SA3913 SPEED Ambidextrous Kriss Vector AEG Gen2 Magazine Release (Grey/Black)
SPEED GoPro Mask Mount
The SPEED GoPro Mask Mounts are specially designed CNC machined mounts for tournament players. This top mounted SPEED GoPro Mask Mount incorporates massive air passages when mounted onto a paintball mask, allowing unrestricted airflow. The top exhaust vents integrated on all paintball masks are there to vent heat and are an essential feature, which should never be obstructed in any way. The SPEED GoPro Mask Mounts are brilliantly engineered to allow the most airflow in the vents, while keeping it strong and secure to your mask.
The SPEED GoPro Mask Mounts are lightweight and compact, allowing it to be more streamlined to complement the styling of modern paintball masks. These mounts are meticulously designed and engineered to be efficient at its purpose, which seamlessly integrate form and function in a simple yet important product.
Stainless steel fasteners are also included with each kit, which enables the SPEED GoPro Mask Mounts for all weather use.
SA3080 SPEED GoPro Mask Mount (Silver)
SA3076 SPEED GoPro Mask Mount (Grey)
SA3081 SPEED GoPro Mask Mount (Black)
SA3077 SPEED GoPro Mask Mount (Gold)
SA3079 SPEED GoPro Mask Mount (Red)
SA3078 SPEED GoPro Mask Mount (Blue)
SA3103 SPEED GoPro Mask Mount (Green)
SA3104 SPEED GoPro Mask Mount (Purple)
SA3100 SPEED GoPro Mask Mount (Pink)
SPEED Premium Propane Adapter V2
The SPEED Premium Propane Adapter V2 is a professionally designed Premium Propane Adapter (Part #SA3300) for GBB rifles and pistol magazines, which now comes with a quick replacement Delrin nozzle tip (Part #SA3301).
The SPEED Premium Propane Adapter V2 is CNC precision machined from USA grade aluminum, and is fully anodized for high wear. The adapter now comes with a new milled exterior for easy gripping.
The SPEED Premium Propane Adapter is CNC precision machined from USA grade aluminum, and is fully anodized for high wear.
SA3300 SPEED Premium Propane Adapter
SA3301 SPEED Replacement Delrin Nozzle for Propane Adapter V2
SPEED Sniper Bipod Picatinny Rails
The SPEED Bipod Picatinny Rail (Part #SA3095) for the Echo1 M28 bolts in place of the two sling mount studs making the M28 even more versatile. You can now use rail mount bipods, rail style sling mounts and other rail related accessories. With the same product features, the SPEED Picatinny Rail (Part #SA3074) for Classic Army M24 will fit other snipers with 50mm mounting centers.
SA3074 SPEED M24 Picatinny Bipod Rail
SA3095 SPEED M28 Picatinny Bipod Rail
SPEED PTW Cylinder Tool Set
The SPEED PTW Cylinder Tool Set (Part# SA3600 & SA3601) comes with a double-ended tool and a keyed notch tool. The double-ended tool has dual hardened drive pins on one end, for removing the spring guide cap; and on the other end, a square socket for removing the cylinder nozzle. The keyed notch tool is designed to prevent the cylinder from rotating, making it easier to remove either end components of the PTW cylinder.
SA3600 SPEED PTW Cylinder Tool Set (Systema, A&K, CTW, DTW)
SA3601 SPEED PTW Cylinder Tool Set (FCC)
SPEED APS2 Cylinder Tool
The SPEED APS-2 Cylinder Tool is a practical tool that will help sniper owners or tech easily take off the nozzle from the cylinder.
The brass nozzle used on the APS-2 cylinder can be easily damaged during removal due to the thin flats that most wrenches cannot get a firm grip and the pressure against the nozzle from the spring within the cylinder. The new SPEED APS-2 Cylinder Tool is machined with two levels to ensure that the nozzle can be removed without any damage. The first level keeps the nozzle centered in the tool at all times, while the second level clamps onto the thin ledge so that the nozzle can be removed easily.
The SPEED APS-2 Cylinder Tool will work with APS-2 sniper rifles that include Classic Army M24 and Maruzen.
SA3075 SPEED APS-2 Cylinder Tool
SPEED M28 VSR10 Cylinder Tool
The SPEED Cylinder Tool is a custom cylinder wrench which makes removing the nozzle off the M28 or VSR10 cylinder much easier, allowing you to have easy access to the cylinder internals.
SA3096 SPEED M28 VSR10 Cylinder Tool
SPEED M4/M16 Tool
The SPEED handy M4/M16 tool can be used at the workbench or in the field to help with quick disassembly of your M4/M16. Instead of using a metal punch to knock out the lock pins and risk marking up the receiver, the SPEED M4/M16 tool uses a special machined delrin unit to push out the lock pins without marring the receiver. This same SPEED tool also helps with a quick and easy removal of the magazine catch every time.
SA2096 SPEED M4/M16 Tool
SPEED Delta Ring Wrench
The SPEED Delta Ring Wrench orientates the drive pins symmetrically so that the torque can be applied in both directions clockwise and counterclockwise. The other unique feature is the pin offset towards the center of the wrench, which will give perfect control and balance of the tool during removal or installation of the delta ring.
SA2068 SPEED Delta Ring Wrench
SPEED Adjustable Nut Wrench
The SPEED Adjustable Nut Wrench is fully adjustable and extremely universal that can be used for the AEG buffer tube castle nut, and can also be used for the Madbull Daniel Defense MK18 and Lite series of barrel nuts. The SPEED Adjustable Nut Wrench uses harden drive pins and has a special machined ridge for better alignment on the nut. A special window opening allows visual of the drive pins for quick placement onto the nut.
SA2078 SPEED Adjustable Nut Wrench
SPEED Magazine Catch Button
The SPEED Magazine Catch Button eliminates the need to depress the button into the receiver in order to remove the magazine catch from the other side of the receiver. Without the SPEED Magazine Catch Button, you will always risk scratching up the receiver every time you need to remove the magazine catch.
The SPEED Magazine Catch Button installs and removes in seconds without depressing the button. A special rotating inner ring within the button quickly threads the button onto the magazine catch with the aid of a special SPEED tool, which is included.
This is a great upgrade for those who spend a lot of time tuning and fear marking up the receiver every time they have to remove the magazine catch.
SA3028 SPEED Magazine Catch Button with SPEED Tool (Silver)
SA3029 SPEED Magazine Catch Button with SPEED Tool (Black)
SA3030 SPEED Magazine Catch Button (Silver)
SA3031 SPEED Magazine Catch Button (Black)
SPEED Next Generation Piston Head
The SPEED Piston Head pioneers the use of U-Cup rings, which have a much lower drag compared to regular o-rings. It also allows faster spring decompression and continuous air seal during the compression stage.
The SPEED Piston Head eliminates the traditional porting holes in favor of a special milled face, which allows for the fastest way for air to get to the U-Cup ring, resulting in the best possible shot to shot consistency due to instant and continuous air seal.
Weight reduction holes are also included to keep the mass even lower which is important for high speed AEGs.
The SPEED Piston Head is available in two versions, one with bearing and one without bearing. AEG owners who already have a ball-bearing spring guide requires the SPEED Part# SA3036 and those with non-bearing spring guide requires the SPEED Part# SA3037.
Fully compatible with V2 and V3 AEG gear boxes.
Machined from USA grade billet aluminum and anodized for durability.
SA3036 SPEED Piston Head with ball bearing
SA3037 SPEED Piston Head only
SPEED M28 VSR-10 Precision Sear Group
The SPEED Precision Sear Group includes a specialized first and second sear group that is designed to handle high spring power. SPEED uses a set-screw for the second sear to ensure that during the pivot range, the second sear rotates true on the pivot pin with no shift or wobble. The second sear contact surface is specially CNC profiled with a curve to minimize wear on the M28 plastic piston and extend the life of the piston to a greater amount of shots before replacement.
Developed by SPEED Airsoft, the SPEED second sear utilizes a very special design of three precision ground pins that can withstand the most powerful spring that sniper owners would ever want to use in their M28 and VSR-10 sniper rifles. The second sear pivots on the center pin and uses the other two pins as a sear lock up while the piston is cocked. This feature allows the SPEED Precision Sear Group to function as a single sear once the piston is engaged.
The SPEED first sear has been reinforced for added strength and the pivot pin is factory pressed in, to ensure that it pivots true and has zero play under load. The first sear surface is undercut so you can get a smooth and crisp trigger pull.
The SPEED Precision Sear Group is machined from USA Grade billet aluminum and hard surface anodized for high durability. It will fit the Echo1 M28 and other sniper rifles that are VSR-10 compatible.
The SPEED M28 / VSR-10 Precision Sear Group Performance Features:
-All pivot pins are precision ground and hardened.
-Second sear triple pin system.
-CNC profiled second sear contact surface for wear reduction.
-Allows for high power spring set ups.
-Second sear set screw to ensure shift and wobble free rotation.
-Undercut first sear area for smooth and crisp trigger pulls.
-Machined from USA Grade billet aluminum.
-Hard surface anodized for highest durability.
SA3099 SPEED M28 VSR-10 Precision Sear Group
SA3098 SPEED M28 VSR-10 Replacement Second Sear
SPEED APS-2 Bolt Handle
The SPEED APS-2 Bolt Handle is available in silver and black. These ergo style bolt handles are designed to be more comfortable than the stock ball style. The SPEED bolt handles enable extended comfort for the sniper enabling easy pulling of heavy cylinder springs and reducing hand fatigue. The SPEED bolt handles are CNC machined from USA grade billet aluminum, which are lighter and much stronger than the stock cast handles. These SPEED APS-2 Bolt Handles will fit sniper rifles that includes the APS2 series: - Classic Army M24, Maruzen and UTG.
SA3072 SPEED APS-2 Bolt Handle (Silver)
SA3073 SPEED APS-2 Bolt Handle (Black)
SPEED M28 Bolt Handle
The SPEED M28 Bolt Handle is available in silver and black. These ergo style bolt handles are designed to be more comfortable than the stock ball style. The SPEED bolt handles enable extended comfort for the sniper enabling easy pulling of heavy cylinder springs and reducing hand fatigue. The SPEED bolt handles are CNC machined from USA grade billet aluminum, which are lighter and much stronger than the stock cast handles. These SPEED M28 Bolt Handles will fit the Echo1 M28 sniper rifle.
SA3092 SPEED M28 Bolt Handle (Silver)
SA3093 SPEED M28 Bolt Handle (Black)
SPEED 3-piece VFC ASW338LM Spacer Kit
The SPEED Airsoft 3-piece barrel spacer kit is engineered to improve barrel consistency for the VFC ASW338LM sniper rifle. The factory rifle uses three M3 screws to float the complete barrel system, which can move and shift under use. The SPEED Performance Barrel Spacer Kit is designed to give the maximum shot to shot consistency for field use by preventing any unwanted barrel movement during each shot.
The VFC ASW338LM already has a rock solid monolith aluminum hand guard coupled with the one-piece continuous top rail. The SPEED Performance Barrel Spacer Kit supports the inner barrel with two o-ring dampened spacers and a specially designed spacer to support the outer barrel within the hand guard.
The SPEED Performance Barrel Spacer Kit (Part #SA3201) is CNC machined from Delrin and uses o-ring dampener throughout.
SA3201 SPEED 3-Piece Spacer kit for VFC ASW338LM
SPEED PTW BB Loader Adapter
The SPEED Airsoft BB Loader Adapter works with existing BB speed loaders to mate properly with PTW magazines for easy reloading.
The new SPEED PTW BB Loader Adapter (Part# SA3610) comes in a set of two.
SA3610 SPEED PTW BB Loader Adapter