top of page
SPEED M4/M16 Tunable Standard Trigger

One of the most important areas of your airsoft gun is how the trigger feels each time you pull it.  The more precise and easier the pull, the more confidence you have with each follow up shot.  

The SPEED M4/M16 Tunable Trigger is precision machined from billet aluminum, using hardened roller pin for a slop-free pull.  Since each AEG has variations, the SPEED Tunable Trigger incorporates a setscrew for easy alignment to the trigger switch assembly unit.  The spring guide also has a larger diameter for preventing the trigger return spring from moving around.  The SPEED trigger has the same trigger geometry as the stock M4 so you will have the same feel but with more precision. 

The SPEED Tunable Trigger will improve performance on a stock AEG switch unit, and will really excel with a MOSFET unit that uses a micro-switch. We recommend the SPEED M4 SE (Special Edition) Triggers for MOSFET upgrades. 

SA3032
            SPEED M4/M16 Tunable Standard Trigger (Silver)  
SA3033
            SPEED M4/M16 Tunable Standard Trigger (Black)  

SPEED M4/M16 Tunable Blade Trigger

One of the most important areas of your airsoft gun is how the trigger feels each time you pull it.  The more precise and easier the pull, the more confidence you have with each follow up shot.  

The SPEED M4/M16 Tunable Trigger is precision machined from billet aluminum, using hardened roller pin for a slop-free pull.  Since each AEG has variations, the SPEED Tunable Trigger incorporates a setscrew for easy alignment to the trigger switch assembly unit.  The spring guide also has a larger diameter for preventing the trigger return spring from moving around.  The SPEED trigger has the same trigger geometry as the stock M4 so you will have the same feel but with more precision. 

The SPEED Tunable Trigger will improve performance on a stock AEG switch unit, and will really excel with a MOSFET unit that uses a micro-switch. We recommend the SPEED M4 SE (Special Edition) Triggers for MOSFET upgrades.


SA3034            SPEED M4/M16 Tunable Blade Trigger (Silver)  
SA3035
            SPEED M4/M16 Tunable Blade Trigger (Black)  

SPEED M4/M16 SE2 Tunable Standard Trigger

SPEED Airsoft new Externally Tunable M4 SE2 (Special Edition) Trigger is designed for V2 gearbox that has upgraded from the stock block-switch to a micro-switch based MOSFET system.  The current SPEED Airsoft M4 Triggers (SA3032 to SA3035) have an internal set screw and are better suited for the older block style switch; whereas the new SPEED Airsoft M4 SE2 Triggers (SA3111 to SA3124) are externally tunable and are suited for today's M4 AEG, which already comes with a MOSFET system. 

The new SPEED Externally Tunable M4 SE2 Triggers incorporate an external set screw and utilize the stock trigger spring, which players can now adjust externally to reduce the pull distance, and fine tune anytime with no need to remove the mech box from the receiver.  

 

SA3111            SPEED M4 SE2 Standard Tunable Trigger (Green)

SA3112            SPEED M4 SE2 Standard Tunable Trigger (Purple)

SA3113            SPEED M4 SE2 Standard Tunable Trigger (Blue)

SA3114            SPEED M4 SE2 Standard Tunable Trigger (Gold)

SA3115            SPEED M4 SE2 Standard Tunable Trigger (Red)
SA3116            SPEED M4 SE2 Standard Tunable Trigger (Silver)
SA3117            SPEED M4 SE2 Standard Tunable Trigger (Black)

SPEED M4/M16 SE2 Tunable Blade Trigger

SPEED Airsoft new Externally Tunable M4 SE2 (Special Edition) Trigger is designed for V2 gearbox that has upgraded from the stock block-switch to a micro-switch based MOSFET system.  The current SPEED Airsoft M4 Triggers (SA3032 to SA3035) have an internal set screw and are better suited for the older block style switch; whereas the new SPEED Airsoft M4 SE2 Triggers (SA3111 to SA3124) are externally tunable and are suited for today's M4 AEG, which already comes with a MOSFET system. 

The new SPEED Externally Tunable M4 SE2 Triggers incorporate an external set screw and utilize the stock trigger spring, which players can now adjust externally to reduce the pull distance, and fine tune anytime with no need to remove the mech box from the receiver.  

 

SA3118            SPEED M4 SE2 Blade Tunable Trigger (Silver)
SA3119            SPEED M4 SE2 Blade Tunable Trigger (Black)

SA3120            SPEED M4 SE2 Blade Tunable Trigger (Gold)

SA3121            SPEED M4 SE2 Blade Tunable Trigger (Red)

SA3122            SPEED M4 SE2 Blade Tunable Trigger (Blue)

SA3123            SPEED M4 SE2 Blade Tunable Trigger (Green)

SA3124            SPEED M4 SE2 Blade Tunable Trigger (Purple)

SPEED KrissVector AEG Gen2 Standard Tunable Trigger

The SPEED Airsoft Tunable Kriss Vector AEG Gen2 Triggers will give players the ability to customize the trigger pull of the Kriss Vector AEG to their style of play.
The SPEED Tunable Kriss Vector AEG Gen2 Triggers incorporate triple set screws, which players can adjust externally and fine tune anytime with no need to remove the trigger assembly from the upper receiver.  The SPEED Tunable Kriss Vector AEG Gen2 Triggers include a specially designed coil compression spring, which will allow players to vary their trigger pull tension.

The SPEED Tunable Kriss Vector AEG Gen2 Triggers can be adjusted from a standard trigger pull, down to a super short competition hair pull.

 

SA3900            SPEED Kriss Vector AEG Gen2 Standard Tunable Trigger (Silver)
SA3901            SPEED Kriss Vector AEG Gen2 Standard Tunable Trigger (Black)

SPEED KrissVector AEG Gen2 Blade Tunable Trigger

The SPEED Airsoft Tunable Kriss Vector AEG Gen2 Triggers will give players the ability to customize the trigger pull of the Kriss Vector AEG to their style of play.
The SPEED Tunable Kriss Vector AEG Gen2 Triggers incorporate triple set screws, which players can adjust externally and fine tune anytime with no need to remove the trigger assembly from the upper receiver.  The SPEED Tunable Kriss Vector AEG Gen2 Triggers include a specially designed coil compression spring, which will allow players to vary their trigger pull tension.

The SPEED Tunable Kriss Vector AEG Gen2 Triggers can be adjusted from a standard trigger pull, down to a super short competition hair pull.

 

SA3902            SPEED Kriss Vector AEG Gen2 Blade Tunable Trigger (Silver)
SA3903            SPEED Kriss Vector AEG Gen2 Blade Tunable Trigger (Black)

SPEED V3 Series Standard Trigger

The SPEED V3 series triggers weigh 1/5 the weight of the stock cast metal triggers.  The lighter weight will give you increase feel and allows for greater tuning capabilities.

The SPEED V3 series triggers are CNC milled from USA grade billet aluminum.  They are available in standard or blade style and come in black or silver.  All the new SPEED V3 series triggers include precision ground pivot pins and lightening holes.  These SPEED triggers will fit version 3 gearboxes that include G36, G39 types and the Echo1 MTC1, MTC2, MTC3.

SA3064            SPEED V3 Series Standard Trigger (Green)

SA3065            SPEED V3 Series Standard Trigger (Purple)

SA3066            SPEED V3 Series Standard Trigger (Silver) 
SA3067
            SPEED V3 Series Standard Trigger (Black)  

SPEED V3 Series Blade Trigger

The SPEED V3 series triggers weigh 1/5 the weight of the stock cast metal triggers.  The lighter weight will give you increase feel and allows for greater tuning capabilities.

The SPEED V3 series triggers are CNC milled from USA grade billet aluminum.  They are available in standard or blade style and come in black or silver.  All the new SPEED V3 series triggers include precision ground pivot pins and lightening holes.  These SPEED triggers will fit version 3 gearboxes that include G36, G39 types and the Echo1 MTC1, MTC2, MTC3.

SA3068            SPEED V3 Series Blade Trigger (Silver)  
SA3069
            SPEED V3 Series Blade Trigger (Black) 

SA3070            SPEED V3 Series Blade Trigger (Green)

SA3071            SPEED V3 Series Blade Trigger (Purple)

SPEED M28 VSR-10 Tunable Triggers

Since the release of the SPEED M28/VSR-10 Precision Sear Group (SA3099), SPEED Airsoft has now developed matching triggers, which are meant to be companion products to work with the SPEED Precision Sear Group in enhancing the performance of the M28 and VSR-10 much further.

The CNC milled SPEED M28 and VSR-10 Tunable Triggers provide more precision over the stock cast versions by allowing the forward pull to be adjustable, so that you can achieve the shortest and crisp trigger pull every time.  The SPEED M28 and VSR-10 Tunable Triggers have a new geometry milled into the sear surface to allow for a lighter and smoother trigger pull.  These tunable triggers also use a precision ground pivot pin for a slop free operation.

SA3090
            SPEED M28 Tunable Trigger (Silver)          
SA3091
            SPEED M28 Tunable Trigger (Black)          
SA3101
            SPEED VSR-10 Tunable Trigger (Silver)    
SA3102
            SPEED VSR-10 Tunable Trigger (Black)    

bottom of page